The SAFETYWARE Double IR & UV Flame Detector combines infrared and ultraviolet sensors to provide superior flame detection in hazardous environments. It is designed to detect fires based on the specific wavelengths emitted by flames, ensuring rapid and accurate identification. This detector can detect flames at a range of up to 50 meters, making it ideal for wide industrial applications where fast fire response is critical. The magnetic bar allows for sensitivity adjustments without having to open the device, making on-site maintenance convenient and safe.
Key Features and Benefits:
- Dual sensor technology: The detector utilizes two infrared sensors and one ultraviolet sensor, offering high-speed and precise flame detection.
- Wide Detection Range: The device can detect flames from up to 50 meters away, allowing for extensive coverage in large industrial areas.
- No interference from environmental factors: The system is highly resistant to interference from sunlight, lightning, and other electromagnetic sources, reducing false alarms.
- Multi-level sensitivity: Sensitivity levels can be adjusted using a magnetic bar without opening the cover, allowing for quick customization based on the installation site.
- Explosion-proof design: Suitable for hazardous environments in industries like oil & gas, ensuring safety in challenging conditions.
Recommended For:
The SAFETYWARE Double IR & UV Flame Detector is ideal for environments where the risk of fire is high, and quick detection is critical. It is recommended for heavy industry applications, including:
- Power plants
- Oil and gas fields
- Chemical plants
- Petrochemical industries
- Tunnel engineering
- Refineries
Specifications:
- Response spectrum range: 4.3μm, 5.0μm (IR); 185~260nm (UV)
- Detection range: Up to 50 meters (with IR sensor) and 120° angle (with UV sensor)
- Response time: Less than 30 seconds
- Signal output: 4-20mA
- Ingress protection: IP66 for reliable operation in harsh conditions
- Explosion-proof rating: Ex d IIC T6 Gb / Ex tD A21 for hazardous zones
- Operating temperature: -20°C to +60°C
- Material: Copper-free cast aluminum with epoxy resin coating for corrosion resistance
- Power supply: DC24V ± 6V
Approvals:
- Ex d IIC T6 Gb / Ex tD A21
- Ingress protection: IP66
SAFETYWARE Double IR & UV Flame Detector Selection Notes
The SAFETYWARE Double IR & UV Flame Detector is part of Safetyware’s gas detection range for workplaces that need early warning of invisible atmospheric hazards. Review it against the gases present, work location, alarm response, hazardous-area requirement and maintenance routine before issuing it for use.
Where It Fits
| Selection area | Practical guidance |
|---|---|
| Product family | Flame detector |
| Typical application | Confined space entry, leak checks, plant monitoring, wastewater, oil and gas, marine, laboratories or emergency response. |
| Procurement note | Review UV/IR technology, coverage, response time, nuisance rejection and alarm integration. |
Calibration and Use Notes
Gas detection equipment should be maintained with the correct bump test, calibration and sensor replacement routine. For confined space entry, atmospheric testing should follow the permit procedure and be interpreted by competent personnel such as DOSH-recognised authorised gas testers where required.
Common Questions
Can this detector cover every gas hazard?
Not automatically. A detector only monitors the gases and ranges it is configured for. Confirm target gas, sensor type and alarm settings before relying on it.
Can I request calibration or matching sensors?
Yes. Contact Safetyware for detector selection, compatible sensors, sampling accessories or gas detector calibration support.
Browse related Flame Detectors products or read the portable gas detector guide for broader selection guidance.
