The CATU Insulating Mat Class 0 is designed to provide effective electrical insulation for operators working in low-voltage environments. Manufactured from high-quality halogen-free elastomer rubber, it protects users from ground potential and electrical shock by creating a safe working surface in front of electrical panels, switchgear, and high-voltage equipment.
The mat complies with IEC 61111:2009 and meets the specific requirements of Category C, including extremely low temperature folding tests at –40°C. Suitable for indoor and outdoor use, it is essential for live and dead working applications.
Key Features and Benefits
- Insulating mat for live and dead working.
- Class 0 – Maximum operating voltage: 1,000 V AC / 1,500 V DC.
- Conforms to IEC 61111:2009 standard.
- Category C compliant (extremely low temperature resistance down to –40°C).
- Protects workers from ground potential.
- Suitable for indoor and outdoor applications.
- Halogen-free elastomer material.
- Flame retardant, puncture resistant, oil and acid resistant.
- RoHS2 compliant and REACH compliant (SVHC free).
- D barcode (Datamatrix) marking with direct link to user guide and technical sheet.
Rigorous IEC 61111:2009 Testing Includes
- Dielectric test
- Puncture resistance test
- Flame retardance test
- Acid resistance test
- Oil resistance test
- Ageing test
Recommended Applications
- Electrical panels and switchboards
- Switchgear rooms
- Industrial LV installations
- Utility substations
- Maintenance workshops
Industries
- Electrical contracting
- Industrial manufacturing
- Energy and utilities
- Infrastructure and facilities management
Specifications
- Product type: Electrical insulating mat
- Class: 0
- Maximum operating voltage: 1,000 V AC / 1,500 V DC
- Standard: IEC 61111:2009
- Category: C (–40°C folding test)
- Material: Halogen-free elastomer
- Thickness: 2.2 mm ± 0.2 mm
- Storage temperature: +10°C to +21°C
- Operating temperature: –40°C to +55°C
- Compliance: RoHS2, REACH (SVHC free)
Model with Sizes (Width x Length)
- MP-11/66 (0.6 m x 0.6 m)
- MP-11/16 (0.6 m x 1.0 m)
- MP-60/02-10 (0.6 m x 10.0 m)
- MP-11/11 (1.0 m x 1.0 m)
- MP-11/21 (1.0 m x 1.2 m)
- MP-100/02-5 (1.0 m x 5.0 m)
- MP-100/02-10 (1.0 m x 10.0 m)
- MP-11/22 (1.2 m x 1.2 m)
- MP-120/02-10 (1.2 m x 10.0 m)
CATU Insulating Mat Class 0 Selection Notes
The CATU Insulating Mat Class 0 is part of Safetyware’s electrical protection range for electricians, utilities, industrial maintenance teams, substations and facilities that need controlled protection against shock, arc flash, short-circuit or emergency rescue hazards. Review it against the actual task, voltage exposure, isolation status and site procedure before issue.
Where It Fits
| Selection area | Practical guidance |
|---|---|
| Product family | Electrical insulating mat |
| Typical application | Electrical maintenance, switching, testing, isolation, substation work, panel service or emergency readiness. |
| Procurement note | Check mat class, voltage suitability, size, surface condition and placement area. |
Standards and Safe Work Notes
Electrical protection should support a planned safe-work sequence: isolate where practical, lock out and tag out, verify absence of voltage, control stored energy, then use rated PPE and tools for the remaining risk. Local buyers should confirm datasheets, applicable EN/IEC/ASTM markings and DOSH/SIRIM KPD documentation where required.
Common Questions
Can this be used for live electrical work?
Only if the product rating, condition, procedure and user competency match the task. Electrical work should be de-energised and isolated whenever practical.
Can I request datasheets or matching accessories?
Yes. Contact Safetyware to compare ratings, sizes, compatible accessories or documentation for your site.
Browse related Insulating Mat products if you are building a complete electrical safety set.
