Fall Arrest Lanyards and Work Positioning Lanyards
Lanyards connect the worker’s harness to an anchor or lifeline. The correct choice depends on movement, free-fall distance, edge risk, connector type and whether shock absorption or work positioning is required.
How to Select the Right Fall Protection Equipment
| Lanyard type | Best use | Selection cue |
|---|---|---|
| Single lanyard | Limited movement at one tie-off point | Check anchor location and clearance |
| Double lanyard | Moving between anchors | Maintain continuous tie-off |
| Energy absorbing lanyard | Fall arrest applications | Confirm required fall clearance |
Standards and Planning Notes
Fall protection should be planned as a system. The safer sequence is to avoid work at height where possible, prevent falls with collective controls where practical, then use personal fall arrest or restraint equipment with a suitable anchor, trained users and a rescue procedure.
Common Questions
What makes a complete fall arrest system?
A complete system normally includes a full body harness, connecting device such as a lanyard or SRL, a suitable anchorage, inspection records and a rescue plan.
Is a safety harness alone enough?
No. A harness must be connected to compatible lanyards, SRLs or lifelines and a suitable anchor point. Fall clearance and rescue arrangements also matter.
Can Safetyware help review options?
Yes. Contact Safetyware to compare harnesses, lanyards, SRLs, anchors, rescue equipment and documentation for Malaysia or Singapore worksites.
Related Support
Need help comparing harnesses, lanyards, SRLs, anchorages or rescue equipment? Contact Safetyware for product guidance, documentation or quotation support.
