The CATU MV-222 Safety Shoes are low-cut leather safety shoes with an insulating sole designed for electricians and industrial professionals. They provide electrical hazard resistance up to 18 kV in dry environments, ensuring reliable protection during electrical and maintenance work. Each insulating sole is individually tested to guarantee consistent electrical safety and performance.
Key Features and Benefits
-
Electrical hazard resistance up to 18 kV according to ASTM F2413:2018.
-
Each insulating sole individually tested at 5 kV for quality assurance.
-
Low-cut leather safety shoe suitable for indoor and dry environments.
-
Breathable microfiber lining enhances comfort during extended wear.
-
Anti-penetration textile midsole improves underfoot protection without added weight.
-
Protective toe cap rated at 240 J, exceeding standard requirements by 20%.
-
SRC-rated slip-resistant outsole for oily and smooth surfaces.
-
Torsion-resistant sole supports stability during movement.
Recommended For
-
Electrical work in dry environments.
-
Industrial and building maintenance tasks.
-
Electricians requiring insulating footwear with comfort and mobility.
-
Work areas with oily or smooth flooring conditions.
Industries
-
Electrical utilities
-
Industrial maintenance
-
Construction
-
Manufacturing
-
Building services
Specifications
-
Model reference: MV-222
-
Shoe type: Low-cut safety shoe
-
Upper material: Leather
-
Lining: Breathable microfiber
-
Electrical resistance: Up to 18 kV
-
Insulating sole test: 5 kV (each sole tested)
-
Toe protection: 240 J
-
Midsole: Anti-penetration textile
-
Slip resistance: SRC
-
Sole property: Torsion resistant
-
Environment: Indoor or dry conditions
Packaging
-
Supplied as a pair of safety shoes, individually boxed.
Approvals
-
ASTM F2413:2018 (Electrical Hazard)
-
SRC slip resistance
CATU MV-222 Safety shoes with insulating sole, leather and low type Selection Notes
The CATU MV-222 Safety shoes with insulating sole, leather and low type is part of Safetyware’s electrical protection range for electricians, utilities, industrial maintenance teams, substations and facilities that need controlled protection against shock, arc flash, short-circuit or emergency rescue hazards. Review it against the actual task, voltage exposure, isolation status and site procedure before issue.
Where It Fits
| Selection area | Practical guidance |
|---|---|
| Product family | Arc flash PPE |
| Typical application | Electrical maintenance, switching, testing, isolation, substation work, panel service or emergency readiness. |
| Procurement note | Match arc rating, coverage, visor or hood, gloves and site arc-flash assessment. |
Standards and Safe Work Notes
Electrical protection should support a planned safe-work sequence: isolate where practical, lock out and tag out, verify absence of voltage, control stored energy, then use rated PPE and tools for the remaining risk. Local buyers should confirm datasheets, applicable EN/IEC/ASTM markings and DOSH/SIRIM KPD documentation where required.
Common Questions
Can this be used for live electrical work?
Only if the product rating, condition, procedure and user competency match the task. Electrical work should be de-energised and isolated whenever practical.
Can I request datasheets or matching accessories?
Yes. Contact Safetyware to compare ratings, sizes, compatible accessories or documentation for your site.
Browse related Electrical Body Protection products if you are building a complete electrical safety set.
