No, N95 and FFP2 respirators are designed for single-use. After being exposed to hazardous particles or if the mask becomes damaged or difficult to breathe through, it should be discarded.

Yes, Safetyware respirators comply with NIOSH, EN 149, and SIRIM-DOSH standards, ensuring protection against airborne hazards like dust, fumes, and harmful chemicals.

Some respirators, like half-face and full-face models, are reusable with replaceable filters, while others, like N95 masks, are designed for single-use.

Yes, the material and pigments of the mask body are FDA- and BGA-approved for exposure to provisions, minimizing the risk of contact allergies.

Yes, the material and pigment of the mask body are FDA-approved for foods, minimizing the risk of contact allergies.

Yes, the SR 900 half face mask is available in three sizes: Small (S), Medium (M), and Large (L).

Yes, SCBA is essential for confined space entry where hazardous gases or oxygen deficiency pose a risk to workers’ safety.

No, the escape hood is intended solely for escape purposes. It should not be used as equipment for carrying out specific tasks

The escape hood should only be used in environments where there is a sufficient oxygen content in the surrounding air.

Yes, the mask can be used as breathing apparatus with a continuous air flow together with the SR 307 compressed air attachment.

Yes, the mask can be used as a filtering device in combination with filters from the Sundström range of filters.

No, N95 and FFP2 respirators are designed to filter airborne particles but do not protect against gases, vapors, or chemical exposure. For chemical protection, a full-face respirator with appropriate filters is recommended.

Yes, Safetyware offers a variety of replaceable filters for reusable respirators, including particulate filters, gas/vapor filters, and combination filters, to ensure protection against specific hazards.

Yes, Safetyware provides fit testing services and training on the correct use, maintenance, and storage of respirators to ensure worker safety and compliance with safety regulations.

Yes, Safetyware offers comprehensive training on the correct use, maintenance, and inspection of SCBA units to ensure users are fully prepared for emergency situations.

Yes, the SR 500 is equipped with automatic air flow control with compensation for air pressure and temperature.

The SR 99-1 unit can be placed on the floor or mounted on a wall.

The right respirator depends on the type of airborne hazards in your environment. For particles like dust and pollen, an N95 /FFP2 respirator may suffice, but for chemical vapors, a half-face or full-face respirator with specific filters is recommended.

After use, the SCBA mask and components should be cleaned with mild soap and water, and the unit should be stored in a cool, dry place away from direct sunlight or extreme temperatures.

A proper fit is essential for effective protection. The respirator should form a tight seal around your nose and mouth with no gaps. Safetyware offers fit testing services to ensure a secure fit for maximum protection.

In a clean and dry area at room temperature in a tightly sealed container for example a plastic bag.

The escape hood is designed for quick and simple donning. Just remove it from its packaging, place it over your head, and ensure the neck seal is secure. No further adjustments are necessary.

Both N95 and FFP2 respirators use multi-layer filtration technology to trap harmful particles, including dust, pollen, bacteria, and some viruses, reducing the risk of inhalation.

The exhalation valve covers have baffles that effectively protect the valves and membranes against dust and paint mist.

The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist.

The SR 500 uses the same control for starting, stopping, and selecting the operating status. It features a display with symbols for easy operation.

The escape hood can be stored for up to 10 years in its vacuum pre-packaged aluminum bag.

The SR 500 can operate for up to 8 – 13 hours on a single charge.

The Standard battery takes approximately 1.5 hours to charge.

The Heavy Duty battery takes about 2 hours to charge.

The SR 77-3 hood provides up to 30 minutes of protection against carbon monoxide.

The mask is equipped with two exhalation valves, ensuring very low exhalation resistance.

The mask is equipped with three inhalation valves and two exhalation valves, ensuring very low breathing resistance.

The replacement schedule for respirator filters depends on usage, exposure levels, and the type of filter. Disposable masks should be discarded after use, while reusable respirator filters should be replaced when breathing resistance increases or after a certain number of hours of use, as recommended by the manufacturer.

Reusable respirators should be cleaned with mild soap and water after each use, and stored in a clean, dry place away from direct sunlight or chemicals. Follow the manufacturer’s cleaning instructions for proper maintenance.

Store N95 and FFP2 respirators in a clean, dry place, away from direct sunlight and chemicals. They should remain in their original packaging until ready for use to maintain their effectiveness.

The SR 500 can be used as an alternative to filter respirators in all recommended situations, particularly for tasks that are hard, warm, or of long duration.

Yes, the SR 200 full face masks together with the SR 500 EX fan are approved for use in a potentially explosive atmosphere.

Yes, the mask has an easily adjustable elastic head harness secured to the visor frame and exhalation valves, along with a large crown plate, providing a comfortable and secure fit.

Yes, the SR 500’s electronics have an ingress protection approved to IP67 according to IEC / EN 60529.

Yes, the mask has easily adjustable elastic head harness straps designed as a V-shaped loop with a large dished crown plate, contributing to a comfortable and secure fit.

Yes, the SR 500 is available in an explosion-protected version, designated the SR 500 EX, for use in potentially explosive atmospheres. More information can be found in the separate product leaflet for the SR 500 EX.

Escape hoods are protective devices designed to help individuals evacuate safely in the event of a fire and/or chemical accidents. They provide respiratory protection and prevent inhalation of harmful substances during an emergency.

There are two battery options available:

Standard (STD) battery with 2.25 Ah capacity

Heavy Duty (HD) battery with 3.5 Ah capacity

N95 respirators are certified by NIOSH and filter 95% of airborne particles, while FFP2 respirators are certified by EN 149 and filter 94% of particles. Both offer similar protection but are tested to different regional standards.

Our SCBA units come with features such as high-visibility face masks, adjustable harnesses, pressure gauges, audible alarms for low air, and durable cylinders for reliable performance in extreme conditions.

The SR 900 half face mask can be used with:
1. Filters from the Sundström range.Remote filter holder SR 905 according to EN 12083.
2. The SR 307 or SR 507 compressed air attachment, which serves as a breathing apparatus with continuous flow for connection to a compressed air supply according to EN 14594:2005.
3. The fan unit SR 500/SR 700 and approved filters included in the Sundström fan-assisted respiratory protective device system conforming to EN 12942:1998.

Our SCBAs comply with EN 137 Type 2 and SOLAS standards, ensuring safety and quality.

The SR 292 main filter consists of a carbon filter part (500g), surrounded by two P3 particulate filters. It cleans the air to remove any remaining particles, gases, vapours, and odours.

Sundström Safety’s escape hoods include:

An internal silicone mask for maximum protection and comfort.
1. A hood made of flame retardant and chemical-resistant material.
2. Simple and quick donning without the need for adjustments
3. An elastic neck seal for a secure fit
4. Options for mobile use in a durable case that can be attached to a belt, and stationary use in locations such as lifts and offices.
5. Vacuum pre-packaged in an aluminum bag for a 10-year storage time.

If the paint is solvent based, use a Sundstrom brown A-filter SR 217 A1 or SR 218 A2 combined with a particle filter SR 510 P3 R and pre-filter SR 221.

The SR 500 is equipped with two filters or combined filters.

Industries like healthcare, construction, oil and gas, manufacturing, and chemical processing commonly use Safetyware respirators to protect workers from airborne particles, toxic fumes, and chemical vapors.

N95 and FFP2 respirators provide similar protection against airborne particles. N95 respirators are certified under NIOSH in the United States and filter at least 95% of airborne particles. FFP2 respirators are certified under EN 149 in Europe and offer a filtration efficiency of at least 94%.

The nominal protection factor is based on laboratory measurements and is the lowest level that a respirator must meet. The assigned protection factor is based on workplace measurements and the actual protection factor as a trained operator is expected to achieve.

SCBA provides a portable air supply, making it suitable for environments with no breathable air. In contrast, supplied-air respirators (SAR) rely on air supplied via a hose, which limits mobility.

Our standard cylinder is rated at 300 bar. A 6.8L cylinder filled to this pressure can theoretically provide approximately 50 minutes of air supply. However, actual usage time can vary significantly based on factors like breathing rate, physical exertion, and other conditions. We strongly recommend allowing a 10-minute safety margin, resulting in an effective duration of around 40 minutes.

To calculate the theoretical air duration, you can use the following formula:

• Duration = (Pressure x Volume) / 40
  • For example, with a 6.8L cylinder at 300 bar:
  • Duration = (300 bar x 6.8 L) / 40 = 51 minutes

Again, this is a theoretical calculation, and actual usage time will be shorter.

Important: Always prioritize safety and consider the potential for reduced air supply under demanding conditions.

The particle filter in the SR 77-3 hood has an efficiency of 99.997%.

The Escape Hood SR 77-3 Smoke/chem is used for evacuation in the event of fire and/or chemical accidents, which may occur simultaneously.

Our SCBAs come equipped with a 6.8L carbon composite cylinder that has a lifespan of 15 years.

Technically, there’s no definitive lifespan for an SCBA. With proper maintenance and replacement of worn-out parts, an SCBA can last for many years. Factors such as usage frequency, environmental conditions, and adherence to maintenance schedules influence the overall lifespan.

Our SCBAs include essential safety features such as a pressure gauge, burst disc, and rubber boot for the cylinder. The backplate features a pull-forward waist belt for comfort, and the mask is lightweight, designed for Asian fit, and equipped with a buddy breather for emergency situations.

The SR 200 PC full face mask is designed for use in tough work environments, providing excellent fit, high protection, eye protection, and very good breathing comfort.

The SR 500 is a battery-powered fan that, together with a filter and an approved head top, forms part of Sundström’s fan-assisted respiratory protective device systems. It provides clean, filtered air to the user.

The SR 900 half face mask is designed for use in most work environments, providing excellent fit, high protection level, and very good breathing comfort.

The SR 99-1 compressed air filter is used for producing clean breathing air from ordinary compressed air.

Safetyware SCBAs weigh approximately 11kg, well below the EN 137 standard limit of 18kg. Please note that the weight may vary depending on whether the cylinder is full or empty.

The working pressure range for the SR 99-1 unit is 6-10 bar.

The SR 200 PC full face mask is made of silicone.

The SR 900 half face mask is made of thermoplastic elastomer (TPE) and polypropylene (PP).

The SR 200 supplemented with breathing hose SR 550 (PU) or SR 551 (rubber) can also be used as a head top together with the Sundström fan unit SR 500 or SR 700.

The SR 77-3 hood offers protection against most gases, including carbon monoxide, and all types of particles that may occur in the case of fire.

The SR 500 uses a lithium-ion battery.

The hood is equipped with a combined gas filter SR 331-2 ABEK1-CO and a particle filter SR 510 P3. This combination provides up to 30 minutes of protection against carbon monoxide (CO) and has a particle filter efficiency of 99.997%.

The mask has a spherical visor made of scratch-resistant polycarbonate, offering a large field of vision.

The SR 500 can be used with various human interfaces, including:

Hoods (SR 520, SR 530, SR 561, SR 562, SR 601, SR 602, SR 604)

Face shields (SR 570)

Welding shields (SR 570/SR 574, SR 592)

Half masks (SR 900)

Full face masks (SR 200)

Helmets with visors (SR 580) Welding shield/helmet with visor (SR 584/SR 580)

Safetyware offers a wide range of respirators, including disposable FFP2 particulate respirators, half-face respirators, full-face respirators, and powered air-purifying respirators (PAPR), designed for various industries and applications.

Safetyware offers SCBA units designed for use in hazardous environments, providing breathable air in situations with insufficient oxygen or harmful gases, ideal for firefighting, confined space entry, and industrial safety.

N95 and FFP2 respirators are ideal for environments with exposure to airborne particles, such as healthcare settings, construction sites, and industries where dust, pollen, or fumes are present.

A full face mask has larger contact surfaces on your face and a stronger head harness that holds the mask in place, thus reducing the risk of leakage between the mask and face.

Silica dust inhalation may cause diseases such as ”silicosis”, which is an chronic lung disease. It may also take many years (10-30) before the disease is detected after being exposed to silica. The disease mainly affects people who work in construction, foundries, mining and quarries. Use respiratory protection unless the silica dust level can be kept below the limit 0.1 mg/m3. Respiratory protection should be at least a half mask respirator with P3 filter that is effective against silica dust.